Mobile Heavy Equipment Mechanic A

Overview

This Position can come out of Valley Cottage, Chestnut Ridge or Sloatsburg.

M-F Start Time 7am

Union Position with Overtime after 40/hours per week

The Heavy Equipment Mobile Mechanic independently performs preventive maintenance, inspections, diagnostics, repairs, and emergency field service on off-highway heavy equipment and related support equipment. The mechanic travels between assigned locations and worksites, brings the right tools and parts to each job, confirms equipment is safe and operational before release, and documents labor, parts, findings, repairs, and follow-up needs in the fleet maintenance system.  This position combines strong diesel, hydraulic, electrical, electronic, powertrain, brake, HVAC, and fabrication skills with sound judgment, urgency, organization, and professional communication. The role requires comfort working with limited direct supervision while remaining fully accountable to IWS Maintenance and Safety Programs.

Essential Job Summary:

• Perform field repairs and preventive maintenance with limited or no on-site supervision in accordance with IWS Maintenance and Safety Programs. 
• Diagnose and repair diesel engines, fuel and aftertreatment systems, hydraulic circuits and components, electrical and electronic systems, powertrain, transmissions, drivelines, brakes, steering, suspension, HVAC, and related machine systems. 
• Service equipment that may include wheel loaders, excavators, compactors, skid steers, material handlers, rail equipment, water trucks, reach stackers, top-pick stackers, and other industrial or support equipment. 
• Respond to equipment failures at transfer stations, rail yards, yards, and other assigned operating locations. Safely assess the work area and determine whether to repair on site, secure the equipment, or recommend transport or vendor support. 
• Use OEM service information, schematics, technical manuals, computerized diagnostic tools, onboard monitoring, fault codes, telematics, pressure and electrical test equipment, and sound troubleshooting methods to identify root causes. 
• Complete machine inspections and operational tests before and after repair. Verify that guards, safety devices, alarms, brakes, lights, and repaired systems function properly before returning equipment to service. 
• Plan and prioritize daily work across multiple locations based on safety risk, operational impact, PM requirements, parts availability, and direction from maintenance leadership. 
• Coordinate professionally with equipment operators, site management, maintenance leadership, parts personnel, vendors, and other technicians. Communicate arrival expectations, diagnosis, status, delays, and next actions. 
• Operate and care for the assigned service truck. Complete required inspections; maintain tools, fluids, spill-response materials, common parts, and safe housekeeping; and report vehicle or equipment defects promptly. 
• Document parts used, labor hours, meter readings, failure descriptions, cause, correction, verification, photos when required, and recommended repairs in the fleet maintenance system before closing or updating repair orders. 
• Identify recurring failures, unsafe conditions, abuse or misuse concerns, and reliability opportunities. Escalate critical findings and recommend practical corrective actions. 
• Perform basic welding, cutting, drilling, component removal and installation, hose or fitting replacement, and field fabrication when qualified and when conditions allow the work to be completed safely. 
• Follow lockout/tagout, blocking and cribbing, fall protection, hot-work, spill prevention, PPE, traffic-control, and site-specific requirements applicable to the task. 
• Participate in after-hours, overtime, weekend, or emergency coverage as business needs require. 
• Perform other maintenance-related duties consistent with the role. 

Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.

• Perform field repairs and preventive maintenance with limited or no on-site supervision in accordance with IWS Maintenance and Safety Programs.
• Diagnose and repair diesel engines, fuel and aftertreatment systems, hydraulic circuits and components, electrical and electronic systems, powertrain, transmissions, drivelines, brakes, steering, suspension, HVAC, and related machine systems.
• Service equipment that may include wheel loaders, excavators, compactors, skid steers, material handlers, rail equipment, water trucks, reach stackers, top-pick stackers, and other industrial or support equipment.
• Respond to equipment failures at transfer stations, rail yards, yards, and other assigned operating locations. Safely assess the work area and determine whether to repair on site, secure the equipment, or recommend transport or vendor support.
• Use OEM service information, schematics, technical manuals, computerized diagnostic tools, onboard monitoring, fault codes, telematics, pressure and electrical test equipment, and sound troubleshooting methods to identify root causes.
• Complete machine inspections and operational tests before and after repair. Verify that guards, safety devices, alarms, brakes, lights, and repaired systems function properly before returning equipment to service.
• Plan and prioritize daily work across multiple locations based on safety risk, operational impact, PM requirements, parts availability, and direction from maintenance leadership.
• Coordinate professionally with equipment operators, site management, maintenance leadership, parts personnel, vendors, and other technicians. Communicate arrival expectations, diagnosis, status, delays, and next actions.
• Operate and care for the assigned service truck. Complete required inspections; maintain tools, fluids, spill-response materials, common parts, and safe housekeeping; and report vehicle or equipment defects promptly.
• Document parts used, labor hours, meter readings, failure descriptions, cause, correction, verification, photos when required, and recommended repairs in the fleet maintenance system before closing or updating repair orders.
• Identify recurring failures, unsafe conditions, abuse or misuse concerns, and reliability opportunities. Escalate critical findings and recommend practical corrective actions.
• Perform basic welding, cutting, drilling, component removal and installation, hose or fitting replacement, and field fabrication when qualified and when conditions allow the work to be completed safely.
• Follow lockout/tagout, blocking and cribbing, fall protection, hot-work, spill prevention, PPE, traffic-control, and site-specific requirements applicable to the task.
• Participate in after-hours, overtime, weekend, or emergency coverage as business needs require.
• Perform other maintenance-related duties consistent with the role.

Requirements and Qualifications:

• CDL, applicable ASE certifications, manufacturer training, or heavy-equipment technician certification.
• Experience supporting waste and recycling, transfer-station, rail, landfill, construction, aggregate, or other high-utilization industrial equipment.
• Experience with telematics, emissions and aftertreatment diagnostics, CAN-bus troubleshooting, and advanced electrical testing.
• Welding and fabrication capability, including safe field repair practices.
• Forklift or mobile-equipment operator certification and EPA Section 608 certification, where applicable.
• Experience managing a service truck, mobile parts inventory, and independent field-service workload.

Work Environment

Listed below are key points regarding environmental demands and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job.

• Required to use motor coordination with arm, hand, finger, and leg dexterity.
• Required to exert physical effort in handling objects more than 25 pounds frequently.
• Requires pushing, pulling, bending, and lifting up to 75 lbs.
• Normal setting for this job is a heavy equipment maintenance facility or outdoors.
• Will be exposed to a physical environment, which involves dirt, odors, noise, weather extremes, or similar elements most of the workday.

Company Culture and Benefits

At Interstate Waste Service, we value our employees and offer a supportive and inclusive work environment. We provide ongoing training and professional development opportunities to help our team members grow in their careers. Our benefits package includes health insurance, retirement plans, and paid time off.

Additional Information

This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. 

Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.  

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. 

Salary Range Minimum

USD $35.00/Hr.

Salary Range Maximum

USD $52.00/Hr.